LUBE OIL SYSTEMS FOR THERMOSOLAR PLANTS

RIVI DELIVERY 4off LUBE OIL SYSTEMS FOR A THERMOSOLAR PLANT IN SPAIN

Technical department of RIVI, we have developed standard lube oil systems for the lubrication of the feed water pumps bearings.

The standard pressure control of the lube oil is done with Smart transmitters (Rosemount 3051 Series).

Extresol Thermosolar Plant, are going to create electricity with an Steam Turbine of 49.9 MW.

In Rivi we are absolutely involved with the new ways of Renowable Energy, and we collaborate with companies submerged in this market.

More information, contact with RIVI.

LUBE OIL SYSTEMS SKID PUMP MOUNTED

RIVI develops also the lube oil systems mounted in pump skids. As it shows in the picture, you can see a lube oil unit completly assembled in the base-plate.

In this project for an important Power Plant in Kuwait (Az Zour, managed by Siemens) we contributed with our customer in the following services:

- Pre-assembly of pipings in our work-house.

- Hidrostatic testings.

- Assembly in the work-house of our customer.

Services of pipes:

- Lubrication (supply & return lines).

- Seal pipes.

- Water pipes.

We can able to give to our customers, not only the manufacture of the lube oil systems, even 3D design of the pipes routing, pre-manufacture, inspections, painting,...

For more information, contact with us:

fernando.bagues@rivi.net or visit http://www.rivi.net/

Thanks for your visit.

RIVI IS SNOWED !

Snow has arrived to RIVI today. A beautifull picture for us !

HAPPY NEW YEAR 2009 READERS & SUBSCRIBERS !

API 614 LUBE OIL SYSTEMS FOR QAFCO 5

Now, a new important contract for RIVI: 4 API 614 LOS to lubricate the bearing of Boiler Feed Water Pumps in the fertilizer plant of QAFCO 5.

We are currently involved in the design and previous documentation.

Readers ! if you need more information about API 614 Lube Oil Systems, contact inmediatly with RIVI. We are really glad to receive your questions,

or.... input a commentary in my news to share ours experiences.

Remember e-mails: fernando.bagues@rivi.net or fbv1512@gmail.com

Thanks for your collaboration !

6 off LUBE OIL SYSTEMS FOR POWER PLANT

A new delivery of LOS for an important Pumps manufacturer have been supplied by RIVI.
In this case, the final destination for these lube oil systems is a Power Plant in Kuwait, Az Zour, which is contracted by Siemens Power Generation.
The application of the oil systems, constructed in accordance with ANSI, API, etc is the lubrication of bearings of Boiler Feed Water Pumps and Motor.
Each system supply 40 lts/min of ISO VG 32 oil. A tank made of carbon steel and rest of lubrication components mounted on top, to cool and filter (25 microns) the oil, and control the pressure and temperature.
Four pressure switches are installed to alarm for Low pressure, trip the auxiliary pump, High pressure, and Low Low pressure.
An ultrasonic (vibration) sensor is installed to control minimum level of oil in the tank.
A differential pressure switch controls the filter element saturation.
You can see the pictures, to check the previous design, and final manufacturing of the LOS.
Please, send your suggestions or inquiries to fernando.bagues@rivi.net

RIVI DESIGN AND MANUFACTURE LUBE OIL SYSTEMS FOR API 611 STEAM TURBINES, FOR PETRO-CHEMICAL PLANT IN CHINA

A new lube oil system have been designed in the technical department of RIVI, for Sinopec Project, sited in China. In this case, the lube oil units are going to be manufactured to lubricated the bearings of Main Boiler Feed Water Pumps, driven by Steam Turbines, according to API 611.
Then, the design of LOS have been in compliance with the API 611, chapter referred about lubrication. Powder of BFW is 1.500 Kw.

Flow needed for the bearings of the pump, gear box and steam turbine is 95 lts/min. Power dissipated 37 kw.

As you can see in the pictures, our technical department develops the complete performance with 3D tools.

Lube Oil System will be manufactured on Stainless Steel. Piping quality Sch 40. For the rest of the components, you can check the data-sheets as follow:

- Weld-pad level indicator

- Level Switch, acc. ATEX EEx d IIC T6

- Temperature Indicator

- Temperature Switch for Electrical Heater (W3 type)

...

to know anythingelse about our capacities and suggestions on API lubrication systems, please, send me an e-mail to fernando.bagues@rivi.net

Thanks for your attention, one more time.

I await your comments !

API 614, CH. 3 FOR PETRO-CHEMICAL PLANT IN CHINA

A new project to lubricate the bearings of High Pressure pump and Driver is being designed for the Chinesse Company Sinopec. In this case, an API 614, chapter 1 & 3 with a flow rate for ISO VG 32 oil, 50 lts/min, is needed. The lube oil system include the following characteristics:

- Oil reservoir made of AISI 304, designed in accordance to the definition of the levels included in API 614 (amplianced to chapter 2, to provide more safety).

You can link directly with the datasheets of the components.

- Weld pad level gage, type UWR.

- Level transmitter, differential pressure type, 2" ANSI flanged.

- Bimetallic Thermometers, heavy duty series, stainless steel.

- Globe valves, CFM8 body, AISI 316 trim, ANSI 150 lbs.

- Pressure gauges, 0-16 kg/cm2, 4 1/2" dial diam.

- Excess pressure valve / relief valve, 1" ANSI 150 lbs.

- Oil-Water cooler, constructed according with TEMA C, ASME VIII, Div. 1.

- Duplex oil Filter, ASME VIII, Div 1, 20 microns of filtration grade.

- Differential pressure gauge, 0-2.5 kg/cm2 to filter clogging indication.

- Pressure transmitter, with digital indicator.

- Main lube oil pump, screw type, shaft-driven.

Nowadays the system is still manufacturing in RIVI work-shop, and it will be delivered the next January.

For further questions about API 614 systems, contact me in fernando.bagues@rivi.net