VISCOSITY MEASUREMENT FOR LUBE OIL APPLICATIONS

The 7829 Visconic Viscosity Transmitter is used for the measurement and control of on-line process viscosity applications. It simultaneously measures real-time viscosity, density and temperature and can be configured to output either dynamic or kinematic viscosity. 7829 Visconic Viscosity Meters build upon the proven performance of the 7827 Digital Viscosity meters and their essential accuracy and speed of response. 7829 Visconic Viscosity Transmitters are stand-alone instruments with two integral 4-20mA outputs and a Modbus RS485 communications port as standard.
In similar fashion to the 7827 Digital Viscosity meters, the 7829 Visconic Viscosity Transmitters are vibrating element meters that have many advantages over capillary, orifice and rotational viscometer types.

Features

Continuous multivariable measurement of viscosity, density & temperature
7829 long stem viscosity transmitter is available in lengths up to 13ft (4m) and is suitable for open and closed tanks
Wetted parts 316L stainless steel, nickel alloy, Monel, Titanium
Pressure rating to 3000 psi (207 bar) for short stem, 1450 psi (100 bar) for long stem versions
Temperate range -60°F to +392°F (-50°C to +200°C))
Viscosity accuracy ±1% full scale
Density accuracy ±0.001g/cc (±1.0kg/m3) (±0.06 lb/ft3)
Hazardous area approved (CSA and ATEX)
Ideal for Newtonian fluids

Benefits

Direct line viscosity, density & temperature measurement
Rugged and reliable, direct insertion meters with very low maintenance to deliver confidence and savings
Viscosity and temperature signals enable on-line measurements of referred viscosity, viscosity index and ignition index (CII / CCAI)
Density and temperature signals enable a range of parameters to be measured including specific gravity, % solids, % volume concentration and oBrix delivering flexibility for your operation
Range of corrosion-resistant materials, process connections, and stem lengths deliver just what is required for the application
Optimized design that is insensitive to vibration, temperature and pressure variations

LUBE OIL PIPINGS DESIGNED 3D SOFTWARE

RIVI is also designing and collaborating with our customers, for the routing of lube oil pipes, seals systems (API Plans), and other types of fluids.

Here you can find some examples of our work.

For more details, contact with Mr. Cambronero (jacinto.cambronero@rivi.net) or Mr. Bagues (fernando.bagues@rivi.net). We will be proud to help you.

Thanks for your attention.

LUBE OIL SYSTEM FOR STEAM TURBINE - CT CC PILAR (ARGENTINA)

RIVI is currently working in an important project for the Combined Cicle Plant of Gobernador Zanichelli - Pilar (Cordoba, Argentina). The lubrication system supply up to 1.600 lts/min of lube oil ISO VG 32 to the steam turbine bearings. Following you can see some of the main characteristics:

- Tank of oil, total volumen 12.000 lts, made of Carbon Steel. Special design for the walls, and internal provisions to avoid foaming, and to provide a correct recirculation of oil before sunction.

- Twin Coalescence Vapour Extractors to mantain free of oil mist.

- Double Heat Exchanger, ASME VIII construction, TEMA C, Carbon Steel body and AISI 304 tubes.

- KSB Centrifugal pumps.

- Main & Auxiliary pump driven by AC Motor, 37 kW.

- Emergency pump driven by DC Motor, 18 kW.

- Accumulator with 200 lts volumen

- Panel for instrumentation, pressure switches, diferential pressure switches.

- Connections shall be ANSI type, NPT for threated

- Lube oil Pressure to supply : 1.8 barg.

In the up-left corner you can see the 3D design developed by our engineers.

Further information, contact with fernando.bagues@rivi.net

LUBE OIL SYSTEMS - FUTURE

RIVI IS currently involved to deliver Lube Oil Units (Forced Lubrication Systems):

- Power Plant Harry Allen (U.S.A).

- Desalination Plant Cap Djinet (Algeria).

- Desalination Plant Mostaganen (Algeria).

- Thermosolar Plant La Florida (Spain).

- Combined Cycle Power Plant Pilar (Argentina).

Thanks to everybody who trust in RIVI, for your continuous co-operation.

API 611 LUBE OIL SYSTEM FOR SINOPEC ETHYLEN

2 units of LUBE OIL SYSTEM have been designed for application to: Feed Water Pump & Steam turbines.

The systems are as follow:

- Heat Exchanger, oil-water, ASME VIII Div. 1, TEMA C construction, AEW Type. Admiralty brass tubes.

- Duplex Filter, ASME VIII Div. 1, 20 microns.

- ANSI 150, ASME B16.5 flanged connections.

- ATEX certified components as motors (Eex e), transmitters (Eex d), junction box (Eex e), glands, conduit & cables (Eex d).

- API 526 safety valves.

- Panel for instruments made of AISI 316.

- Weld-Pad level, AISI 316 with volumes indication.

- AISI 316 reservoir and piping, SW.

- AISI 316 tubing for instrumentation. Root valves for pressure instruments with manifolds (block & bleed valves).

Follow designs, models & more projects. RIVI can do it.

RIVI is finishing to build up API 614 for Sinopec Plant

Do you remember our article from 20 of November ? It was the first design of the lube oil unit to lubricate bearings of motor-pump skid, in the project of Sinopec.

Now you can see the previous image during the testings. It will be delivered the next week.

• Flow rate: 50 lts/min
• Power dissipated: 9 Kw
• Electrical and electronic devices: accomplish with Zone 2
• Heating system: Steam
• Working pressure: 1.5 kg/cm2
• Working temperature: 45ºC
• Main pump & Auxiliary pump are driven by electrical motors (Eex e)
• Piping & tubing ASTM - AISI 316
• ASME IX Welding procedure
• ASME VIII, Div. 1 for duplex filter and water-oil cooler
• Globe valves, gate valves made of AISI 316
• Panel board for instrumentation, AISI 316
• Carbon Steel baseplate with grouting & venting holes

More information if you send me an e-mail fernando.bagues@rivi.net

Thanks.

RIVI REFERENCES OF LUBE OIL SYSTEMS WORLDWIDE

RIVI is present in many countries worldwide, having installed hundreds of lubrication systems for the proper maintenance of the quality of the oil in rotating elements.

A hundred of companies are totally satisfied with the high efficiency of the RIVI Lube Oil Systems.

These are some of our most important references:

- Ethylen Plant of Sinopec (China) - API 614 Ch. 3 Lube Oil Systems

- Ethylen Plant of Sinopec (China) - API 611 Lube Oil Systems

- Refinery Plant of Petronas (Malaysia) - API 614 Ch. 3 Lube Oil Systems

- Refinery Plant of Sipchem (Saudi Arabia) - API 614 Ch. 2 Lube Oil Systems

- Fertiliser Plant of Qafco 3 (Qatar) - API 614 Ch. 3 Lube Oil Systems

- Fertiliser Plant of Qafco 4 (Qatar) - API 614 Ch. 3 Lube Oil Systems

- Power Plant of La Minera Escondida (Chile) - API 614 Ch. 3 Lube Oil Systems

- Power Plant of Teverola (Italy) - API 614 Ch. 3 Lube Oil Systems

- Desalination Plant of Rabigh (Saudi Arabia) - API 610 Lube Oil Systems

- Desalination Plant of Shuqaiq (Saudi Arabia) - API 610 Lube Oil Systems

- Power Plant of Jebel Ali (UEA) - API 610 Lube Oil Systems

- Power Plant of Elm Road (USA) - API 610 Lube Oil Systems

- Power Plant of Pee Dee / Sanctee Copper (USA) - ASME Standard Lube Oil Systems

- Power Plant of Az Zour (Kuwait) - ASME Standard Lube Oil Systems

- Power Plant of El Kureimat (Egypt) - ASME Standard Lube Oil Systems

- Power Plant of Mostaganen (Argelia) - ASME Standard Lube Oil Systems

- Power Plant of Turk (USA) - ASME Standard Lube Oil Systems

- Power Plant of Kleen Energy (USA) - ASME Standard Lube Oil Systems

- Desalination Plant of Hadera (Israel) - API 610 Lube Oil Systems

- Power Plant of Imminghan (UK) - ASME Standard Lube Oil Systems

... and hundreds of units more. Since 1.991 RIVI has manufactured more than 1.000 Lube Oil Systems.

Thanks to our customers for your confidence.

DOES YOUR COMPANY NEED A LUBE OIL SYSTEMS MANUFACTURED BY RIVI?

GET THE EXPERIENCE OF A PROFESSIONAL COMPANY !