HOW DO MANUFACTURE IN RIVI ?

Dear readers,

I would like to show you how manufacture one of our last lube oil systems.

It is part of one "big size lube oil unit". It can supply 140 m3/hour of OIL for lubrication.

For more information, send an e-mail : comercial@rivi.net

Thanks for your visit.

DESIGNING LUBE OIL SYSTEMS - 3D ... BY RIVI

RIVI developers and designers of our Lube Oil Systems can give to our customers an important previous information with 3D drawings, and they are considered helped in the planification of Pipe Outlines, obtaining all the details about sizes and cotes necesaries to implant the piping and tubing.

We show you some of our 3D projects.

For more information you can send an e-mail to fernando.bagues@rivi.net

or insert your comment in this news.

RIVI MANUFACTURE LUBE OIL SYSTEMS FOR SEVERAL APPLICATIONS

RIVI are going to deliver for the next week more Lube Oil Systems. In this case, the machine include an oil heater system consist on:

- Electrical Heaters, calculated for the proper heat transfer to increase the temperature of oil inside the tank, and go down the viscosity (very important for the start-ups, because the oil is usually too cold).

- Thermal Oil Reservoir.

- Thermowells for heaters containing Thermal Oil.

- Shut-off valves and tubing (stainless steel).

Through this system, the temperature is transferred smoothly, more equilibrate and uniformly.

The lube oil system shows in the picture is going to install for lubricate a Pilger Machine in an important Pipe Manufacture.

You can find more information in this catalogue: http://www.rivi.net/aplicaciones/Oil_Circulation_Systems.pdf

or contact here with your comments.

RIVI manufacture 3off L.O.S. FOR POWER PLANT PUMPS

We are happy in RIVI for the next deliver of Lube Oil Systems (3 units) manufacturing according to API and more requirements. L.O.S. are going to assemble for BOOSTER PUMPS, and STARTUP BOILER FEEDWATER PUMPS, and final destination will be a Power Plant in U.S.A.

This units are accomplished to:

- ASME 16.5, Pipes Flanges ANSI 150 lbs.

- ASME B16.34 for threaded elements.

- ASME B16.11, Forges Steel Fittings, Socket Welding.

- ASME B16.25, Buttwelding Ends.

- ASME IX for weldings and weld procedures qualifications.

The systems include:

- Pressure switches, pressure gages and flow indicator for the discharge oil lubrication.

- A differential pressure indicating for each duplex oil filter.

- Lube Oil Piping have been constructed of Type AISI 316L.

- The lube oil cooler have been constructed of AISI 316.

- Wiring and conduit have been constructed in accordance with UL and NFPA.

If you wish more information about Lube Oil Systems for Pumps (Boiler Feed Water Pumps, API 610 pumps, etc), please, send an e-mail to fernando.bagues@rivi.net

API 682 - API PLAN 52

RIVI presents and launches to the international market new solutions for Seals Plans API 52 and API 53A, in accordance with API 682.

If you need some information, contact to fernando.bagues@rivi.net.

We can offer to your company High Quality and Economical prices.

OLAER, TRABAJO ACUMULADORES ACEITE

Nuestros amigos de Olaer nos envían esta información:

OLAER-OILTECH IBÉRICA, S.A.U. es una Empresa fundada en 1969, miembro del grupo del mismo nombre, dedicada a la fabricación y comercialización de productos para el sector industrial:
-OLH- Componentes hidráulicos, Acumuladores hidroneumáticos a vejiga, membrana y piston, Intercambiadores de calor aire o agua, Filtración, Control, Refrigeradores industriales de agua y aceite, Actuadores, Motobombas...
-AGUA- Acumuladores hidroneumáticos para antipulsaciones o antiariete propios del sector

Disponemos de un archivo en el que se muestran TODAS las aplicaciones de acumuladores para la industria. Puedes verlo en este link: http://www.olaer.es/index.php?id_seccio_menu=5#

Fabricantes como RIVI confían en el producto Olaer para la instalación de los mismos en sus sistemas de lubricación avanzada.

Seguiré informando de más noticias de nuestros colaboradores.

HY-PRO TECHNOLOGY FOR TURBINES - LUBE OIL.

Hy-Pro Low Spark Discharge filter elements are now available to combat turbine lube oil varnish. Contact us about filter elements for GE Frame 7 turbines or any other application where element sparking is causing problems. For more information visit our product pages then click on filter element upgrades.
Hy-Pro is proud to announce the release of coalesce skids for turbine oil and diesel fuel applications. For more information visit our product pages and click fluid conditioning equipment.
Element Upgrade Interchange Guide February 2008 is the most current version of the element interchange guide to be used when upgrading to Hy-Pro from other manufacturers. Fluid Contamination Solutions Catalog 1.1 Jan 2008 is the latest Hy-Pro catalog of equipment, filter assemblies, off-line skids, and more. For all the information available in one small package request a CD.
Attend one of our Distributor training schools at Hy-Pro Filtration in Fishers, Indiana and learn about contamination & filtration basics plus advanced total system cleanliness strategies to implement at the user level. Upcoming classes:
April 21~25, 2008 (currently full, waiting list available)
October 10~13, 2008
Additional training schools will be added as needed.

3nine - AIR-OIL SEPARATION TECHNOLOGY

Several fields of application

3nine’s technology offers many advantages in performance and it can be scaled for wide ranges of flow and purification demands. This means that the technology can be applied in many different fields. 3nine’s technology is admirably suitable for application in fields that combine large quantities of contamination with stringent demands for purification, including the purification of small particles. 3nine has focussed on three areas of application for its new technology: manufacturing industry, heating plants, and the food processing industry.

Evolution

For more than one hundred years, conical discs have been used to improve centrifugal separation of liquids.

3nine has implemented this technology in air and particle separation. The separation technology is well known and it works exactly the same for air as for liquids. Separation and draining of the separated particles demands new ideas and solutions.

3nine has several leading researchers within centrifugal separation, leading to several new patents on separation solutions and rotor construction. In the past few years, current and past 3nine researchers have produced 40% of the world’s patents in centrifugal separation.
3nine is therefore today’s world leader in these areas.

API 676 Oil Pumps for lubrication

PCX Series is SEIM answer to demand by the market requiring pumps for low / medium pressure lube circuits which accomplish. API676 II ed rules.

These PCX Series pumps feature jacket (standard made from carbon steel, other materials upon request) and ANSI IN/OUT ports (DIN upon request)

PCX Series is versatile, thanks to inlet port available both axial or radial and is capable to satisfy most of demands in lube applications.
Further options are available, like execution for high viscosity fluids or noise suppression due to air bubbles entrapped in the pumped fluid. Further customization (e.g.: pumpm foot) make PCX Series another succesfull SEIM Product.

Components by leading World manufacturer’s (like the mechanical seal – but not limited too!) and a 100% internal shop test on manufactured pumps (either API or VDMA specifications), grant to the end user a long term and reliable duty for SEIM pumps.

PCX Series also includes all benefits in using a three screw pumps made by SEIM:
low noise level
extremely low pulsations by the pumped fluid
high priming capability (self priming)
optimal performances even with fluid with entrapped air
no pollutant release in the pumped media
low maintenance required
Pump supply can be completed by including baseplate (also conform to API rules), as well as coupling with spacer and coupling guard, electrical motor by leading manufacturer (also Atex execution).

TYPICAL APPLICATIONS
Lube systems for:
· speed reducers and variators
· turbines

FABRICACIÓN DE SISTEMA DE LUBRICACIÓN

La pasada semana la compañía RIVI suministró un equipo completo para lubricación de reductores en una importante compañía siderurgica situada en el país vasco. El sistema, compuesto de tanque de aceite de 12.000 lts y sistema de bombeo de 660 lts/min, integraba un perfecto sistema de prefiltración de aceite en la zona de retorno, de 200 micras y placa de calmado para favorecer la desaireación y eliminar turbulencias indeseadas en la zona de control de nivel y aspiración de bombas. Las bombas de husillos (2+1) para suministro de aceite lubricante y el conjunto de componentes para control de temperatura y presión del sistema, fueron ensamblados en bancada de acero carbono separada del depósito principal.

FINALLY, WE GET A LUBE OIL BLOG IN WEB 2.0

This is a new way to help, suggest, and let us know new ideas to improve and solve problems in rotary systems, about oil cooling and lubrication.

Wellcome to my lube blog.

My name is Fernando, but you can use my nick name "Fer". Let´s go to share our experiences and needings.

Besides, I´m working in the company RIVI, with a lot of people working in this specific market. We can give you solutions, together.

===================================================================

Esta es una nueva forma de ayudar, sugerir y darnos nuevas ideas apra mejorar y resolver problemas en refrigeración y lubricación de sistemas rotativos.

Bienvenidos a mi nuevo "blog de lubricación".

Mi nombre es Fernando, pero puedes usar mi nick-name (alias) "Fer". Vamos a compartir nuestras experiencias y necesidades.

Ademas, trabajo en la compañía RIVI, con un montón de gente trabajando en este mercado específico. Juntos podemos darte soluciones.

================================================================

Thanks a lot for your collaboration / Gracias por vuestra colaboración.